on Twitter! @LindsayJoelle
:)
DIY //Between the Lines\\
I came across the most amazing, innovative and cool DIY site that you simply MUST check out! Click here to go straight to Between the Lines for tutorials on such awesome things as DIY heart garlands, ornaments and a denim and leather tote I am desperate to make myself!
They've got tons of great earth lovin' DIY projects all of us (yes, even you) can do. Check out a few of my favorite here:
Quick Fix Grocery Bag
Instructions:
1. Take an ironed adult size T-shirt, right side out. (You could use a kid's T-shirt for a smaller sized bag).
2. Fold it in half as shown in picture 2.
3. Cut off the sleeves as shown in picture 3 and put them aside as you'll need them later to make a little pouch.
4. Cut around the neck-line as shown in picture 4.
5. Sew the bottom of the shirt closed using a French seam. If you're not familiar with the French seam check out this post. (Basically, you sew the hem closed on the right side, turn the bag inside out and sew another seam, sandwiching the first seam inside). Next, sew boxed corners, as explained here, in step 1. You could iron everything flat now, if you like.
6. Place the bag in front of you on a flat surface. Starting from the bottom, fold over the bag as shown in picture 6, about 2 1/2 inch, that is.
7. Now, starting about 3 inches from the side, with your scissors make 1/2 an inch to 3/4 of an inch cuts through all layers, leaving about 1 1/8 inch between every cut. Continue like this all the way to the other side and stop about 3 inches from the side seam.
8. Next, fold it over some more (an additional 2 to 2 1/2 inch) and repeat the cutting, but now right in between two cuts from the previous line, as shown in picture 8.
9. Go on like this a couple more times, depending on the size of your bag - I did 5 rows in total.
DIY: Colorful Wire Clothes Hanger
We're still in summer mode here, though for K. today is the last day of his summer vacation, unfortunately. This year's summer vacation has been very relaxing - Carpe Diem (seize the day) has been our motto. We've been doing plenty of things but only because we wanted to. And today I really wanted to do something crafty! So I did. It took me a while before I came up with something, though. I made a big mess as I kept pulling things out. But then eventually pieces fell into place when I found a wire clothes hanger (check out this article if you'd like to find out more about the origin ofthe wire clothes hanger - the drawings are great!).
The result of my crafty afternoon is this enhanced, colorful wire clothes hanger... with a short description in 16 photographs. Again, it's an easy craft you could have your kids do or help you with on a rainy afternoon.
What you'll need:
- wire coat hanger (the ones you get at the dry cleaner's)
- bias tape, ribbon, or a piece of fabric
- a piece of (masking) tape
- white glue
- optional: ribbon, rivet punch + rivets
Steps:
1. If you don't have ribbon or bias tape at hand, make your own (pic. 4 & 5) by cutting a long strip from a piece of fabric. Don't bother about cutting in bias, we want the ribbon to fray! Yes, fray! Although I had only a small piece of fabric, I cut one long strip from it. This is how: start cutting a strip lengthwise from one side to the other, BUT WITHOUT CUTTING THROUGH TO THE VERY END! Repeat, alternating sides as shown in the diagram below.
2. Attach the ribbon tothe wire coat hanger as shown in pic. 6 and wind the ribbon around a couple of times to hide the tape.
3. Next, start twisting the ribbon aroundthe wire all the way around. Don't be afraid of the fabric fraying - we like the effect! To make sure the ribbon is everywhere tightly twisted around the wire , check once in a while and twist the ribbon between your fingers as you work your way back to where you stopped.
4. At the bottom of the hook twist the ribbon around both wires and work your way up the hook (pic. 9 & 10).
5. Cut off the ribbon leaving a 1 inch end. Put on some white glue and next continue twisting the ribbon, smearing the glue in and over the fabric and such way that the tip is completely covered and there are no loose ends left (pic. 11-13).
6. Optional: Decorate with a6. Optional: Decorate with a tag. I used stamps for this and the motto of our summer "Carpe diem". Make one for every family member and have their names on it, or if you plan for a summer party make one for every guest. The possibilities obviously are endless. Use the rivet punch to attach a rivet and tie to the hanger with a piece of ribbon. All done!
(All images and content come directly from Between the Lines, thank you!)
They've got tons of great earth lovin' DIY projects all of us (yes, even you) can do. Check out a few of my favorite here:
Quick Fix Grocery Bag
Instructions:
1. Take an ironed adult size T-shirt, right side out. (You could use a kid's T-shirt for a smaller sized bag).
2. Fold it in half as shown in picture 2.
3. Cut off the sleeves as shown in picture 3 and put them aside as you'll need them later to make a little pouch.
4. Cut around the neck-line as shown in picture 4.
5. Sew the bottom of the shirt closed using a French seam. If you're not familiar with the French seam check out this post. (Basically, you sew the hem closed on the right side, turn the bag inside out and sew another seam, sandwiching the first seam inside). Next, sew boxed corners, as explained here, in step 1. You could iron everything flat now, if you like.
6. Place the bag in front of you on a flat surface. Starting from the bottom, fold over the bag as shown in picture 6, about 2 1/2 inch, that is.
7. Now, starting about 3 inches from the side, with your scissors make 1/2 an inch to 3/4 of an inch cuts through all layers, leaving about 1 1/8 inch between every cut. Continue like this all the way to the other side and stop about 3 inches from the side seam.
8. Next, fold it over some more (an additional 2 to 2 1/2 inch) and repeat the cutting, but now right in between two cuts from the previous line, as shown in picture 8.
9. Go on like this a couple more times, depending on the size of your bag - I did 5 rows in total.
DIY: Colorful Wire Clothes Hanger
We're still in summer mode here, though for K. today is the last day of his summer vacation, unfortunately. This year's summer vacation has been very relaxing - Carpe Diem (seize the day) has been our motto. We've been doing plenty of things but only because we wanted to. And today I really wanted to do something crafty! So I did. It took me a while before I came up with something, though. I made a big mess as I kept pulling things out. But then eventually pieces fell into place when I found a wire clothes hanger (check out this article if you'd like to find out more about the origin of
The result of my crafty afternoon is this enhanced, colorful wire clothes hanger... with a short description in 16 photographs. Again, it's an easy craft you could have your kids do or help you with on a rainy afternoon.
What you'll need:
- wire coat hanger (the ones you get at the dry cleaner's)
- bias tape, ribbon, or a piece of fabric
- a piece of (masking) tape
- white glue
- optional: ribbon, rivet punch + rivets
Steps:
1. If you don't have ribbon or bias tape at hand, make your own (pic. 4 & 5) by cutting a long strip from a piece of fabric. Don't bother about cutting in bias, we want the ribbon to fray! Yes, fray! Although I had only a small piece of fabric, I cut one long strip from it. This is how: start cutting a strip lengthwise from one side to the other, BUT WITHOUT CUTTING THROUGH TO THE VERY END! Repeat, alternating sides as shown in the diagram below.
2. Attach the ribbon to
3. Next, start twisting the ribbon around
4. At the bottom of the hook twist the ribbon around both wires and work your way up the hook (pic. 9 & 10).
5. Cut off the ribbon leaving a 1 inch end. Put on some white glue and next continue twisting the ribbon, smearing the glue in and over the fabric and such way that the tip is completely covered and there are no loose ends left (pic. 11-13).
6. Optional: Decorate with a
(All images and content come directly from Between the Lines, thank you!)
Spare A Few For Farm Animals
Check out my fundraising page here!
Farm Sanctuary is the nation's leading farm animal protection organization. Since incorporating in 1986, Farm Sanctuary has worked to expose and stop cruel practices of the "food animal" industry through research and investigations, legal and institutional reforms, public awareness projects, youth education, and direct rescue and refuge efforts. Farm Sanctuary shelters in Watkins Glen, New York, and Orland, Calif., provide lifelong care for hundreds of rescued animals, who have become ambassadors for farm animals everywhere by educating visitors about the realities of factory farming.
I hope you will make a pledge of support for farm animals in need by making a donation for my participation in the 2010 Walk.
(Image)
Subscribe to:
Posts (Atom)